SLEEVE ANCHORS
    A device consisting of (1) a threaded stud with a conical end flared outward, (2) a hollow,       
cylindrical dilating sleeve assembled over the stud and positioned against the minor diameter of    
the cone, and (3) a washer and hex nut assembled at the end opposite the cone.  The anchor
works by expanding against the material in which it is embedded.  When the hex nut is tightened,
the conical end is pulled into the dilating sleeve, pushing it outward 360° around the anchor
into the masonry.
SIZE
THREAD SIZE
DRILL SIZE
BOX QTY
* ULTIMATE
PULLOUT LBS.
* ULTIMATE
SHEAR LBS.
1/4 X 1-3/8 ◘ ▫
 10-24
1/4
100
1,200
840
1/4 X 2-1/4 ◘
 10-24
1/4
100
1,200
840
5/16 x 1-1/2
 1/4-20
5/16
100
1,740
1,460
5/16 x 2-1/2
 1/4-20
5/16
100
1,740
1,460
3/8 x 1-7/8
 5/16-18
3/8
50
2,700
2,280
3/8 x 3
 5/16-18
3/8
50
2,700
2,280
3/8 x 4
 5/16-18
3/8
50
2,700
2,280
1/2 x 2-1/4
 3/8-16
1/2
25
4,400
4,440
1/2 x 3
 3/8-16
1/2
25
4,400
4,440
1/2 x 4
 3/8-16
1/2
25
4,400
4,440
1/2 x 6
 3/8-16
1/2
25
4,400
4,440
5/8 x 2-1/4
 1/2-13
5/8
25
6,180
7,160
5/8 x 3
 1/2-13
5/8
25
6,180
7,160
5/8 x 4-1/4
 1/2-13
5/8
10
6,180
7,160
5/8 x 6
 1/2-13
5/8
10
6,180
7,160
3/4 x 2-1/2
 5/8-11
3/4
10
7,960
10,960
3/4 x 4-1/4
 5/8-11
3/4
5
7,960
10,960
3/4 x 6-1/4
 5/8-11
3/4
5
7,960
10,960
◘ These two sizes come with acorn nuts.  All other sizes come with hex nuts.
* The test values were obtained using 3500 psi concrete.  A safe working load should not exceed 25% of
stated values.
Other diameters, lengths, finishes, and variations may be available in :
Steel, Stainless, Hex Head, Round Head, Flat Head
              After you see what your looking for, make a list, then call, fax, or email us for price and
availability.  You'll find a staff that is eager to assist you.  
CALL  1-800-877-2907 or FAX  1-781-821-2845
Click Image Below To Return To
ANCHORS